What do i torque my head bolts to on my ford 400m?

Question:
what do i torque my head bolts to on my ford 400m? i am replacing my head gaskets and need to know the torque s specs for everything. thanks

Answers:

does anybody know where to buy 2 or 3" blind spot mirrors made of glass not plastic like the ones in autozone

cylinder head bolts
step 1) 75 ft. lbs.
step 2) 95-105 ft. lbs

What do the letters at the end of the model of a car stand for?

ford mondeo 1.8 16v zetec will not idle when warmed up. any ieads?

http://members.tripod.com/torquespecs/fo...

How can I remove oil spots from my concrete driveway, (engine oil)?

5.8LM (351M) and 6.6L (400cu. in.)
Component Torque
alternator adjusting arm-to-Alternator bolt 24-40 ft. lbs.
alternator adjusting arm-to-Engine block bolt 15-20 ft. lbs.
alternator bracket-to-Engine block bolt 15-20 ft. lbs.
camshaft sprocket bolt 40-45 ft. lbs.
camshaft thrust plate bolts 9-12 ft. lbs.
crankshaft damper-to-Crankshaft bolt 70-90 ft. lbs.
crankshaft pulley bolts 35-50 ft. lbs.
cylinder head bolts step 1 75 ft. lbs.
step 2 95-105 ft. lbs.
distributor hold down bolt 20 ft. lbs.
EGR valve-to-Carburetor spacer 12-18 ft. lbs.
exhaust manifold bolts 18-24 ft. lbs.
Flywheel-to-Crankshaft bolts 75-85 ft. lbs.
fuel pump-to-Engine block or timing cover bolt 10-15 ft. lbs.
nut 14-20 ft. lbs.
intake manifold bolts 3/8 in. Bolts 22-32 ft. lbs.
5/16 in. Bolts 19-25 ft. lbs.
intake manifold vacuum fittings 6-10 ft. lbs.
main bearing cap bolts 70-90 ft. lbs.
oil filter-to-Adapter or Engine block NOTE
oil filter insert-to-Engine block or adapter 20-30 ft. lbs.
oil inlet-to-Main bearing cap bolt 22-32 ft. lbs.
oil pan bolts 7-9 ft. lbs.
oil pan drain plug(s) 15-25 ft. lbs.
oil pump bolts 22-32 ft. lbs.
radiator fan-to-Water pump bolts/Nuts 12-18 ft. lbs.
rocker arm cover bolts 3-5 ft. lbs.
rocker arm stud/Bolt-to-Cylinder head 18-25 ft. lbs.
rod bearing cap nuts 40-45 ft. lbs.
spark plugs 10-15 ft. lbs.
starter mounting bolts 15-20 ft. lbs.
thermactor pump adjusting arm-to-Pump bolt 22-32 ft. lbs.
thermactor pump bracket-to-Engine block bolt 30-45 ft. lbs.
thermactor pump pivot bolt 35-45 ft. lbs.
thermactor pump pulley-to-Pump hub 12-18 ft. lbs.
thermostat housing-to-Engine bolts 12-18 ft. lbs.
timing cover bolts 12-18 ft. lbs.
water pump-to-Engine block or timing cover bolts 12-18 ft. lbs.

peterbilt trucks?

NOTE Turn oil filter an additional 1/2 turn, after filter
seal contacts engine.

---

Can I fix my alternator with only a crescent wrench?

go to autozone .com they might have it for you.

---

More Questions & Answers ...

open header?

Pennsylvania Residents?

1990 bronco 2 with 2.9 liter,it loses oil pressure when it gets hot could this be a sending unit?

How long will a supercharger generally last?

The RPM varies from 500 to 1600 usually when my engine is on and gear in neutral?

What does POA stand for on an automotive AC system?

How can I raise rear suspension without buying air struts?

how do i change the headlights on my 2005 chevy suburban?

Spark plug problem?

I have a rather deep 6 in scrach on my car. Whats a good product to remove the scratch?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.