Question:
Answers:
How do i remove white paint scuff marks from my maroon Mitsubishi Diamante?
The beads of the tire are made of high tensile steel wire to allow it to anchor the tire to the rim. The bead is coated with bronze or brass coating for achieving adhesion with the rubber. The liner is made of halobutyl rubber which allows them to be "tubeless." Tires many years ago had to have inner tubes to allow them to hold air. The plies of the tire are made from a rubberised textile fabric such as nylon, polyster, or kevlar to give the tire strength. Radial tires get their names from these plies since the fabric cords cross the carcass of the tire at 90 degress, radially. Steel belts are made from rubberised cord and provide reinforcement to the tread. The tread is made of rubber compounds which is formulated for the type of driving the tire will see to give the proper traction for the conditions. The rubber itself is made by mixing all of the compounds that will make up the tire, putting it through the process of calendering and extruding, and then they build the tire, and then perform the vulcinization process (curing) which is done by adding sulfur to the rubber (Originally thought to be invented by Charles Goodyear, but later credited to Mesoamericans in 1600BC. Hope this helps!Is my radiator cap the same as my coolant cap in a 96' Chevy Beretta?
asphalt and rubberrubber,nylon and steel wire
How to add an extra battery to your amp in your car??
rubber reinforced with steel wirethe main component is vulcanized rubber.
other materials used may be for stiffness or safety: carbon fiber mesh, steel belting, fiberglass reinforcement etc.
Nissan Maxima 1989 nothing blowing out of vents.?
If you have 365 used condoms, you can make a tire from that and call it a GOOD year!How long and how far can I drive with a thrown rod?
Haha, so bad.
where can I get a ferrariF430 workshop repair manual?
They are made of rubber, just not THAT type of rubber. The rubber is reinforced with either steel or composite materials such as kevlar or carbon fiber, but steel reinforced rubber is the predominant type.
Can anybody help me with a big a problem with my '99 Isuzu Rodeo?
Car tyres are made from simple rubber got fro the sap of a rubber tree.They are latter processed and treated with specialized chemicals through some industrial chemical process .It has metal wires in it to enhance firmness and shaping.Does a average engine rebuild kit come with all the gaskets (head gaskets ect...)?
Modern tires are made from petroleum.I have a 1997 isuzu rodeo when I shift into 4wd and front axle won't lock-in, any answers?
rubber. :-)Rubber, wire, petroleum
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.