Question:
could someone help me, i need to change the water pump on my 92 sundance, i just replaced the motor and now the water pump is going...gggrrrrrr, i need to fix it asap!!
and no i do not want to take it into the shop, it costs alot and the guy we use is whiny about it.lol
please, if you can offer anything.......
or if there is a website out there like the chilton manual free style...lol, id like it.
Answers:
How do the classifications work when you have an accident?Is a cat a the worst or cat d?
You have to remove the belts and hoses that go to the waterpump. Remove the bolts that hold it on, and pull the pump off.
Do tires get flat spots in cold weather?
Depending on how much room you have, you may have to remove the radiator to do this.
Remove any remaining gasket material from the engine block. Then replace the gasket and pump, and anything else you had to remove.
which car is better audiA698-99 diesel or peugeot607,2000-2002 HDi or volvoS80 diesel-99-2000?
Replace the antifreeze you lost with a 50/50 mix of water and antifreeze.
How to fix a hole/crack in a carbon fiber hood?
You just replaced the motor, but kept the old water pump?Does not compute.
Urinating in a gas tank of a car...?
Haynes is better than Chilton, in my opinion. However, your local library has reference manuals. Good luck.Downtown LA Trade Tech College?
get a new one then LOOK at all of the things that you need to remove that will tell you why it cost so mutch [ it is about a 3 hr gob ] drain remove gasget put back fill etc. if you have a chilton then it will tell you all that you need [ cost ? time ? up to you]Does anyone know where to find replacement mirrors for an 05 /expedition or navigator?
its a front wheel drive car so its a tad more difficult than with a rear wheel drive car. you didnt specify engine size, 2.2 4cyl or 3.0 V6. if its the six, id spend the money and have it professionally done, its already hard enough to do everything else on one of those. if its the 4 cyl then its cake. find it, drain the block and radiatior, unbolt everything in the way, clean it, but a NEW pump not a rebuilt one, bolt it up, put everything back the way it was and put a 60/40 mix of coolant, it offers a better mix. good luck.Disconnect battery ground cable.
Drain cooling system, and remove upper radiator hose.
Remove A/C compressor from mounting brackets and position aside with refrigerant lines attached, if equipped.
Remove alternator.
Disconnect lower radiator hose, bypass hose. Remove four water pump to engine attaching screws and water pump, Figs. 53 and 54.
Reverse procedure to install.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.