Oil Change?

Question:
what is the bolt for the oil called because i need to get a new one because of grinding.

Answers:

Where can I find a 1965 rear window?

Seems like you have stripped the hole for your drain plug?

what can cause ford escort P reg to fail exhaust emissions?


They sell oversize drain plugs that might seal your stripped hole. Do not over-tighten the replacement one.

my SUV temp gauge does not ever move off of the cool side...does my termostat need changing??


There is another drain plug that inserts into the drain hole with a large rubber seal.. if you use this one.. don't ever take it out all the way to drain the oil.. [if you take it all the way out.. the little butterfly piece it screws to inside the oil pan will fall off.. freely rolling around inside your oil pan with no way to reposition or reconnect to it..]

noisy car? HELP!!?


Loosen this style drain plug and take a putty knife and insert under the large rubber seal to let the oil drain out. Re-tighten snug but never over tight.

can i exchange peugoet xrdt 306 engine which has connections for bosch fuel pump with an lucas fuel pump?


Does this help any?

How do I put fluid in my 1999 Chevy Astro van rear end?

bolt??

adding used oil to my car?


you mean the Oil PLUG ;)

Vauxhall Vectra Key Fobs?

Oil Plug or Oil Sump Nut.

I ran over a log, now my car is making a thumping noise...?

Not sure what u mean by grinding unless ur talking about u stripped the thread. its a oil drain plug.

what gm engine do i have?

Drain Plug... Make sure you get a new washer, too.

How hard would it be to change the brakes on a.....?


If the threads are stripped in the pan, they make rubber expandable ones. These do work ok, but need to be changed each time you change the oil.

key stuck in the ignition on pt cruiser not sure why or how to get it out?

Drain plug, oil service plug, Grinding?--i don't want to know

1982 rabbit vw?

Drain plug would be my guess

Do I really need to "run in" a new car? And if so, how?

The bolt that youre talking about s the oil plug, or oil pan bolt.

i have a 1993 ford xlt 4x4 and i don't know how to engage the four wheel drive please help me!?


If youve stripped the bolt than just replace the bolt at your local auto parts store for like a buck. However, if you've been using power tools like at Walmart, you may have also stripped the the plug well, in which case, worst case, you'll need a new pan all together.

TIREd of spending $ on car. Did I overpay?


Remember, the oil plug bolt doesnt require that much torque especially, if it comes with a plastic or rubber gasket.
More Questions & Answers ...

  • I just bought a new car, should I get it serviced at my deale or just go to a jiffylube type place?
  • What should I do now??
  • Is there a difference in tires for a car and a tow trailer?
  • What size of bumper would best fit your ride?
  • So..can anybody help me please?
  • anybody have the idea about converting ABS to NON ABS system ?
  • my car lets out cold air only?
  • How do you improve a weak car battery?What do you add?
  • I have a 95 mish mirage and need to know if its OBii and how to reset the engen light?
  • at what temp. does transmission fluid become to hot and no good?
  • This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.


    Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.