Question:
i have a 1996 chevy cavalier it strted fine then i putt a slave cylinder and throwout bearing in it now will not start it won't even crank all the light's inside comme on it powers my 200watt amp an stereo fine but when i go to start it, the lights go dim the stereo goes out an the car does nothing the battery is putting out 466 cranking amps with a 12.7volt charge the starter has ben bentch tested an works but all u hear is a click an then nothing NOTHING HAPPENS all fuses have been checked their all good, ignetion switch has been replaced
Answers:
where are the spark plugs in a 2000 oldsmobile intrigue?
It's also possible that it's the ignition switch or starter solenoid, but my guess is that the wires on the starter have become disconnected.
How much does it cost to replace the transmission of a 1993 Camry?
sounds like your starter.Dude you did something wrong.....
Check if the engine sparking! It could be the coil!
What does it means when smoke is coming out of the steering wheel column?
You need a new starter. This has happend to me before.how can i make my own car lift?
Check your wiring where you were working last.I bet you left some wires unconnected or pinched wires between bell houseing and trans.Check computor ground connection At the engine.My 94 BMW 525i Beeps continously?
First check to see if you can turn the engine over, in your repairs you may have inadvertently locked up the engine, because from what you have written your battery and starter sound fine.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.