Question:
yes i am putting the Krylon touch to it, i sanded and primed it,maby my prep work wasn't good,please help..hoe can i lose these "dull" spots?
Answers:
The heater in my car won't work?
well first of all your supossed to wipe the bumper down with a wax and tar bug remover wich causes fish i (the little dark spots)second lightly sand the bumper down with a 400 sand paper lightly to scratch the clear coat ,then spary the bumper evenly going over half of the sprayed area constenly to give an even coat.
let the first coat dry for about 10 mins then put a secon coat on ,you might have to do this several times if it coming out of a spray can ,finaly get a clear coat can you might need 2-3 cans which you dont spray until the next day .make sure its about 70 degrees in the area your painting ,it helps dry faster .bust make sure nothing is blowing on to the bumper or youl get little bits of dirt wich will rune what you did.good luck on you paint work
which petrol should I use for my santro, ordinary or premium for better mileage and maintainance?
you can try using some buffing compound to it,,this might take the dull out of it,,other wise you might have to repaint it,,try doing it where its kind of cool this is better when using spray cans,,it slows the drying process down on it,,this is whats causing it t have the dull spots ,,good luck hope this help,s.,,have a good x-mas.Another question about the toyota corolla?
PREP WORK PREP WORK PREP WORK!I am by no means a pro @ painting vehicles but from experience w/ my own car, if i actually took a long time to sand and prime it would turn out amazing. when i rushed through the first few times or just got sick of sanding it was garbage. really take time doing the prep work , it pays off beyond belief in the end
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.