If by mistake i over-completed my engine oil by a little over the stick measuring line,would it be a problem?

Question:


Answers:

How much should I pay for new rotors and brakes, and also I have a tire that leans and grinds? 94 explorer?

It depends how much. If it is a little 4 cylinder, an 1/4 inch above "FULL" can be a big problem. If its a big V8, even a half quart over wont be a big problem. A 1/4 quart over isnt going to kill your engine... alot of vehicles say "4.7 qts or "5.3" quarts in the service manuals... we usually go by half quarts, so they get 5 and 5.5 quarts in an oil change.

1995 Chevy Lumina 3.1 burnt valve?

If you definetly over filled it alot, just remove the new filter, empty it out, and screw it back on. Because oil filters need to be pressurized, to fill up with oil completely, it will not be a big deal.

---

Why I am getting a small electric shock when I close the car door?

No if by just a little.

---

Where can I get a convertible top including a frame for a 2000 Chevrolet, Cavalier?

well that little bit can turn into a few quarts in the engin so yes it is a problem, that is why it says MAX FILL on the dip stick.

What does low compression in cylinder 4 mean?? and does it mean we need a valve job?? can there be another rea

it can cause oil to get onto your spark plugs and that will stop your car pretty quick

---

Decals on plastic for ATV?

A liitle ove the line is no biggie. Just be more carefull, better to be slightly under the line then overfill.

---

Do you need a turbo in order to install a cold air intake?

if it's by a little it shouldn't be a problem, but if it's more than 2centimeters over i would probably call an oil & lube tech. just to see what they say.

---

Could someone help me work out what would be the best route to take regarding a car accident please?

No.Alot of cars hold like 3.5 to 4.5 quarts of oil and the guys will put in the other half quart.Did it to mine for years and never hurt it.Your pan will hold it.

---

I have a 1994 MAZDA 626 ES ,when changing rear disc brakes,how to you move the pistons back into the calipers

If that little (one pint of one quarter ) is no problem.
However , if that little (is half of one quarter ) in a four cylinder .
You should anticipate to remove it.
If that little is near to one quarter; probably will cause the rear main seal will leak or the front seal.
In some case will cause the car will smoke( blue smoke at the pipe)

---

More Questions & Answers ...

Can I use slightly smaller tires for my car?

2000 Dodge Ram 1500 Transfer case leak?

Can I swap out a quad 4 engine with a 3.1 V-6 engine in a 1995 grand am? will it bolt up, ?

What to spray on car to remove dried bugs?

Fuel pump, filter or else?

1995 Dodge Neon transmission sensor leaking? pleaze read details?

How to get carburetor fast idle to unload faster?

Body side molding?

Rb25det motors are the best of the nissan motors?

What is the location of the Crank Sensor on a 2000 Cadillac Devillle North Star?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.