I have white scuff on my black car. any suggestions on removing it?

Question:


Answers:

I have a 2000 yukon, 5.3L engine, & service engine soon light is on...code fault is po171(system too lean)?

rubbing compound . if that don't work try wet sanding it lightly with 2000 sand paper and use dawn with a bucket of water. but the compound should work

---

rover problem...mechanic messed my car up!?

use a light buffing compound and rub by hand. you can find it at your local auto parts store

---

My car doesn't start?

rubbing compound. if that doesn't do it your probably stuck with it

---

How do I change j hook type car windshield wiper blades?

Just like the other guy said use a very light/non-abraisive buffing compound and a buffer if you have one and try buffing it out. If you use a buffer and have never used one before then be sure to remember to move it around slowly in circles because if you leave it in the same spot then you can make it worse instead of better by thinning the paint too much. That's actually what buffing compound does it thins your paint a little. But if it's a minor scratch you should be able to get it out without any problems at all. After your done using the buffing compound then clean the area you were working on with water (no soap) and when it dries apply some wax. Hope this helped point you in the right direction.

---

More Questions & Answers ...

Is there a place online where i can test different colors of paint on my car to see what it would look like?

1999 Honda Civic, how long does the battery usually last and how much are they to have installed?

VW Polo FOX 1993 1L, having issues!?

How do I connect an AMMETER in my car?

How do you fix a striped screw from plastic?

i have a craked cadillac engyne how can i fix it?

What's wrong with my central locking?

procedure for adjusting new lifters in a 327 motor?

What is the best way to clean a car's motor?

wat does an carburetor for a pocket bike do?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.