Question:
Is there any difficulty in removing and replacing the rear coil springs on my Ford Ka?
Answers:
Will 1987 Thunderbird fuel tank for fuel injection work with carburator?
If you want to do it yourself get a Haynes workshop manual and read it carefully and make sure you are confident you can do it.If not take it to a garage they will charge about a one hours labour per spring + the cost of the springs.
how do i change a freeze plug on a 96 s-10 blazer?
Cheaper to replace the car, they are crapnew years friend puked in my car?
no its all quite straight forward.nah not at all; in the boot undoo both of the top nuts and bolts (17mm) that goes through the top of shock absorber but not the mounting bolts. Yon will have to raise the car body off the ground about 2ft and support it securley DONT JACK IT UP ON THE REAR AXLE. once the wheels are free of the ground unscrew the lower bolts and remove the shocks complete with the springs. then slide off the old springs and slide on the new springs. and put the shocks back on the same way as you took them off.
shoud take about an hour
Paul (nvq qualified)
not really but you may need a coil spring compresser but if theres 2 people you could manage without as theres not much tension
The ventilation system in my car is broken?
Depends what year it was made. The early ones can be changed without spring compressors just by pushing down and removing the top bolt once the damper has been removed from the car. The newer ones were a bit trickier as the have a small circlip which is difficult to remove.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.