Question:
Answers:
Spark plug problems.?
alernators usually consist of having two bolts; one that the alternator pivots on and one that holds the thing in place which allows you to adjust the tension on the belt. remove the wire connectors, loosen the bolts, remove the alternator, installation is in reverse order but make sure the belt is tight by prying it in position with something that you can get leverage with then tighten the bolts to specified torque if need be, make sure to remove battery connectors from terminals before beginning the job
will a 235 size tire fit on a 8" rim?
What year is it?
Older trucks you have to loosen the belt and pull out the alternator. you also have to make sure to get the right one, because they have 2 prong and three prong i belive.
lucas oil additive?
disconnect the battery, remove the belt, remove the alternator. installation is reverse.
what is the spark plug gap for a ford mondeo?
First raise the hood.2. Disconnect the battery.3Diconnect all wires going to alternater4Take serpentine belt off 5.Remove alternater6.Put new one on in reverse order
More Questions & Answers ...Transmission Swap?
Chevy Trailblazer transmission question?
Why does my Check engine light come on when I get above the 5000 ft elevation level?
How can i fix a windshield that has pitts in it?
Clicking popping noise coming from front right side of 98 mazda 626?
does anyone know the tork pounds for a 96 couger trans cover?
need parts for 1986 gmc S15?
Lack of Heat for a E-150 Coversion Van?
damaged haed on a screw?
car HOOD??
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.