How can you make your paint stay on instead of peeling off?

Question:
This goes for cars. Do you need to add more clear coat?

Answers:

Difficulty fitting a timing belt on vauxhall Vectra X18E engine?

NO....25 coats of clear coat won't help.....you need to sand BEFORE painting to give the paint a surface it can adhere to...and make sure ALL loose paint is sanded completely off before even priming.

---

My car is making a high pitched squeal at start up. I goes away after 15-20 sec of driving. Any ideas?

wax the car ever 30 days

---

Is buying a 95 nissan maxima worth it?

As Richard G stated, it happens prior to the paint going on. If the person painting the car did not do the final prep correctly, flaws will eventually appear...even with new cars.

---

i own a 2002 kia optima with 121,ooo it runs great , how long do they run for with care?

I had this happen on my dodge neon. I just wanted the paint to stop coming off, so I bought a can of automotive spray paint and sanded the edges where it was peeling off. Painted it with the spray paint and let it dry. It didn't look the best, but it stopped it from peeling.
It worked fairly well,but you still have to be careful if you wash it with a power washer.

---

my car window won't stay rolled up what do i do?

the best thing to make paint stick is thorough preparation prior to painting. If your talking clear coat peeling, this is not unusual and the only fix is to have it properly prepped and repainted. If you want to preserve the paint/clear-coat and get maximum life out of it, keep your vehicle in a garage.

---

What is the purpose of a "COUNTER BALANCE CAM" in the new General Motors V6 4.3L engines?

I'll bet you drive a Chrysler product.
My wife has a Plymouth Voyager and the paint has been peeling for a couple years now.
Short of having all the paint removed, and repainted, there's nothing you can do.

---

Do anyone know how to get rid of the maintance warning shown on the auto's dashboard?

Clear coat paints suck. The old enamel paints were the best,but E.P.A. screwed that up. When I repaint cars,I use enamel.

---

More Questions & Answers ...

My (manual trans) stick shift gets stuck and wont get into gear, is this simple or urgent?

Oil can Henry's?

winter snow tires?

what oil should i use in for a ford ka?

I have a 1991 Suburban. What engine and/or transmission do you suggest to change to get a better MPG?

how do you know if a catalytic converter is going bad?

Can you go to autozone for them to diagnose a "service engline soon" light for free?

What is the function of O2 sensor, what will happen if it is not working other than "Service Engine Soon"?

Ford Mondeo engine temperature gauge goes cold over 50 mph?

How do you convert cooking oil to diesel gasoline?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.