Question:
i have a 87 supra non turbo. i took the head cylinder off and took it to rebuilde it and when i put it back every thing back together with new gaskets, clean the carbulater, clean everything. and when i started it turn of right away because it cool 1st it needs to war up in order to stay on. what could be the problem? and also the camshaft are missing 2 screws and not on but it still works, can something go wrong or what?
Answers:
What are diesel fuel additives and how they work?
Wow. Stop, put the wrench down. I assume you mean the cam caps are missing bolts if so yeah that will cause problems, big ones. As far as the car not staying running if it's an electric choke there's probably something wrong in that department.Check ur choke. This car probably has an electronic choke, make sure the connections are there. If they are, check and make sure the assembly is working properly. Otherwise, u need a new electronic choke.
You choke on the carb needs to be re-adjusted. You may also have a vacuum line that is not connected or is not connected correctly. You may also have a plug wire that is crossed. As far as the cam, do not start the motor again until you have all the correct retainers installed. They have them there for a reason. The cam (under hard acceleration) is under a lot of stress. Make sure all the correct fasteners are installed.
wow, stop. put the wrench down. HA! i gotta remember that one
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.