Question:
I have never changed shocks before. Could I do it and what do I need?
Answers:
Looking for location of Aspire oil pressure relief valve assembly.?
The guy above me is absolutely correct!! I have 2 mustangs and they are both the same way.Can a 2002 Ford crown VIcoria run on ethanol??
i own a repair shop ,and this can be a dangerous job to do, i suggest that if you have never done or tried this before that you have it done,it will be a lot cheaper than trying this your self,you can get hurt doing this especially if you don't have the proper tools for doing it,it takes more than just a few tools to do it with,good luck hope this helps.Yeah, it's no big deal. I couple of wrenches and go.
Anybody let a car sit for 6 months, then run it, how much water do you think got into the gas?
its a lil easier changing the shocks then it is changing the springs. all you have to do is jack your car up and put jackstands under it, supporting the car. then put the jack under the rearend to support it. undo the bolts on the bottom and the top of the shocks (the bolts on the top are inside the trunk area) then replace the shocks. check to make sure the bolts you are putting back on are grade 8 bolts. they should be a bronze color with 5 dashs on the head of the bolt. good luck!More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.