Question:
it has been there for a week and has just told me.
Answers:
It means the connecting rod between the crank shaft and the piston has broken.
Loud screeching in brakes when I brake in the driveway in reverse?
Worst case scenairo. Rod has gond through the engine. Engine is definitely junk
How do you replace a battery in a 1996 Oldsmobile Aroura?
Possible worse case: The engine cylinders have been scraped up and damaged beyond repair. You won't know this unless you take the engine apart. Engine is junk
Rod broke but did no damage to cylinder walls. Replace rod, recommend a complete engine rebuild if your taking it this far. Very expensive.
please help with vauxhall vectra w reg?
I recommend simply getting a replacement engine or a junk yard engine and placing it in the car instead of dealing with the thrown rod. Too many unknowns and it will be expensive to take it apart to determine if it's even worth fixing.
She probably thew a rod. Big Bucks......OUCH!
Where do you look for replacement interior parts for Chevy Blazer?
for a start top up the oil ,and see what happensive just had a new engine fitted in my car and a blueish white smoke is coming out off the exhaust?
i noe of a link that solves the very same problem here it is:are my trucks valves adjusted right?
http://www.fairyclicksptr.com/pages/ptp....
What is wrong with my car part 2. What is a cylinder coil?
duh? no oil in itlol! oil leak? well I'd assume it is because it is leaking, need to find out where?
are you joking ? lol it needs oil she is probably ruining the engine
what is recalibrated? in your spedometer?
I'd fill it with oil. Sounds like the main bearings. Drive it until it quits.How do you bleed the Brake Lines on a 93 Grand Am Pontiac car.?
make sure the oil doesn't run out or the engine can seizeput new transfer case in 85 chevy,won't move..linkage?
check for leaks, is the oil pan plug tight, it the oil pump working, is the oil filter tight?
Most likely a rod bearing. Drop the pan wse a torque wrench and remoue each cap and inspect. If they're all good check all the mains.
Is there any special tips to maintain turochargers in heavy vehicles?
First of all, put oil in it before you ruin it if it isn't already. It is probably the lifters for the valves rattling due to lack of oil. This is something you don't want to heard coming from your engine as once you stick a valve the piston can smash into it thus rendering your engine useless. You can also ruin the bearings, cylinder walls oil pump and so on.Dodgeman Help, What is wrong with my 1997 Ford Ranger 2.3L?
ring it out...........Trying to Find a Steel Rim for 2001 Galant?
Put plenty oil in and run it. If it is still knocking & rattling you h ave major engine problems. You will need to get another car, or spend big bucks to repair the old one!i have a 91 honda accord lx, the engine fan kicks on and off while the car is off?
OK, as suggested - put oil in the engine. If it had run dry it would have already seized up and stopped. The Ztech engine had, prior to 1998- hydraulic valve lifters. These type of lifters get sticky, and noisy if proper care is not given to oil changes, because they depend on clean oil to function properly.My back defroster in my car doesnt work.?
Suggestion: Get a pint of Marvel Mystery Oil and add about 1/2 to the crankcase, being careful not to overfill the engine. Then run the car for a day or so, and see if the noisyness improves. If it does, then get a can of Wynn's Motor cleaner and add that to the crankcase, run it according to the instruction on the can, then change the oil. Put the other 1/2 of the Marvel Mystery Oli in, add fresh oil and it should get much quieter,
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.