How much for brake change and to turn the rotors?

Question:
i need to get my brakes changed as they need new pads... and they said i need my rotors turned too.... how much total should i expect to pay??

If one brake line to one caliper brake during braking will all brake fail?


thanks!

Answers:

What is the best way to clean sludge off an engine?

YEAR, MAKE, MODEL, and shop around. With the current price of steel, it might be worth it to replace the rotors.

cylinder heads fixed 98 navigator?

Not much more than 100dollars unless you need parts replaced like calipers,or rotors

Can Any One tell me some sits fix my cars and learn the detales in it?

depends on the vehicle. you can get some pads for $10 and other high end ceramic pads with sensors for $150. Let me know what vehicle you have and I can look it up and give you accurate pricing and what to expect.

Does anyone know of a place where I can download automotive repair information?


Hope this helps and let me know if you need anything else.

My 91 caprice wont start in the cold? what could be the problem?


Wayne - logixautoparts.com
wgarrison@logixautoparts.com

Do I need to change transaxle & differencial fluid in my 1997 GeoPrizm 1.6 at 110000 miles (city driving).?

on what kind of a vehicle,,you know the price does change on some cars and trucks,,due to the size of the rotors,,and the needed parts to repair them with,,next time say what your working on,,good luck.

I have a feeling my gas in my car is bad.?

At the shop i work in its $92/hour and its hours labour for doing pads (including test drive and inspection) and then 15 minutes per rotor, and then parts on it. depending on the brand of car and the brand of brakes, expect to pay anywhere from $50 - $250 for pads. also the prices do very with area you are located in.

suzuki vinson 500 auto 5spd?

cmon man, you ned to know how to do these things and save that $. My brake pads usually run about $20.00 and I put them on myself, you need to have someone show you how to do it and then you practice it til you get it. The rotors usually are $10.00 a piece to turn. You'll save plenty of dough if you do it yourself. Go to the parts store and ask some of the mechanics that come out the store they may be willing to do it for you 4 a cheap price. I'm no mechanic, but I am mechanically inclined. I have women who ask me to change their brake pads all the time, its a good bit of tax free $ too.

Vauxhall Agila. Peculiarity with handbrake?

2 hundred 4 u and 4 her 2 bjs 2 u good deal for everyone
More Questions & Answers ...

  • i have a 1998 chevrolet cavalier that's skipping or missing under light throttle conditions.it idles fine?
  • What should I do with my 97 Metro with engine issues sell it for parts or give it to a frnd and say good luck?
  • i have a 2002 pontiac grand am 4 cyl?
  • How Many Miles Until We Bring It In To The Dealer For A Check Up?
  • Land Rover has sputtering engine - what are likely problems?
  • I have a car engine that has not been cranked in 6 months. I can turn the crankshaft 3/4 turn manually.?
  • I have 1/2 inch thick ice on my windshield. How can I make a dent in it without busting the glass? Thanks!?
  • Looking for an old car ragged out, running, not running, don't matter. Cheap.?
  • Engine Bay Fuse Question ..?
  • How can I apply tinted glass on cars?

    • This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.


    Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.