I replaced clutch on my 94 ranger 2.3 engine now it squeals when clutch is depressed help?

Question:


Answers:

how do you wire up a sat nav system leaving the cigaret lighter free?

There are some basic things you should change when you change a clutch in a vehicle. You should change the clutch disc, the pressure plate, and the throw out bearing. You should also resurface the flywheel, but this isn't absolutely neccesary. When reinstalling the throwout bearing, it should be properly lubricated. If you do not, it may squeal like your vehicle is doing. Even if you did lubricate it, you may not have applied enough.

How is a tachometer attached to an engine? On a hand-held meter, where would you put the red and black wire?

I hope this helps. If you have any more questions please feel free to contact me.

---

My Headlights in my Dodge Grand Caravan has somthing foggy. How can i take it off??

Throw out bearing sounds dry. Hopefully you changed ALL the clutch parts.

---

is that radiator problem ?

I would agree with the first response. The throw out bearings is dry, perhaps not replaced with the new clutch. I always replace the throw out bearing everytime I replace a clutch, it is cheap insurance.

---

Scooter Troubles...advice needed quickly!?

Did you also change the throwout bearing?

---

Big-bore exhaust>>>>>>?

Did you replace the clutch assembly yourself or did a mechanic technician do it? It is possible that the throw out bearing has insufficient lubrication and would require the gearbox and clutch to be removed again to grease the input shaft and then reinstall box and clutch. It does happen commonly, just an accidental careless mistake. Not 100% that this is the cause just a possibility. Hope I'm on the right track for ya.

---

what is rear ebs on a 97 grand prix?

Did you replace the throw-out bearing. I hope so, but that's what it sounds like

---

will an egg in a gas tank of a car do anything?

Well, Its unanimous. The throw-out bearing is the culprit
I hope you put a new one in....Its part of doing the clutch replace right. ....."Do It Once, Do It Right".

---

How long do I have to plug in a block heater before driving in this fridged weather?

all the answers sound right but some flywheels also have a spigot bearing for the output shaft of the gearbox, this can also dry and wear out and should be checked and or replaced when doing a clutch. either way it will have to be a gearbox out job.

---

More Questions & Answers ...

what does wd-40 mean?

schedule maintenance?

2001 pont. gprix Gas gauge always reads full, shows true level with car running and in park . Any ideas?

Where on the net can i get dutch (also called german ) clamps ?

VW Diagnostics?

Doge man, Tell me more about lemon law?

my citroen ax has started to cut out when I slow down. It starts again but then loses revs. Can anyone advis

Body shop is 1 1/2 month late on insurance estimates. Manager (Ins paid) refuses to provide date. My Options?

ponitac power window problem?

find used motor 95 satrun?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.