Question:
I have 2004 Chevy Trailblazer V8 4x4 that the water pump went out on. Does anyone know how long it takes to change it and where it is located? The dealer wants $750.00 to fix it. I really don't want to get riped off.
Answers:
Why do Japanese vechicles not have a Digital Speedometer Display on the dashboard?
Depends on the engine. For the 4.2L (6 cylinder), the water pump (part # 24576952) costs $107.22. Labor time is 3.1 hours. There is also about 2 gallons of Dexcool coolant, about $30.My car won't pass emissions, fault codes bring up evap control system?
For the 5.3L (V8), the water pump (part # 89017439) costs $231.42. Labor time is 3.6 hours. Also, 2 gallons Dexcool, $30.
how can i clean my carbon fiber hood (it looks cloudy)?
For the 4.2L, $750 is definately too much. For the V8, unless the labor rate at that dealer is about $135 per hour, $750 is still too high.
Trying to Find a Steel Rim for 2001 Galant?
I worked for a Chevy dealer for 3 1/2 years, and now own an independant shop. I recommend you find a good honest independant, and stick with them. I would charge just over $300 for the 4.2, about $500 for the V8. Now that you know the price of the parts and the labor time, you can make some calls and get a good estimate. Your first question should be what their labor rate is. Then tell them what you need done. Good luck.
What's The Average Price for Car Allignment?
Well havnt taken one off of a trail blazer but they are all basic.except on transvers engines the kind that sitfrom right to left, get the book on it and follow the directions you can do it. It takes time and its kinda funky but you can do it. The only thing that concerns me is that you dont know where it is at. Hey why dont you call around some shops are price different. Was this a dearler price?? California shops charge about 75 to 90.00 per hour. It would take about 2.5 to 3.5hours for the job plus the pump get a good one.Can any one tell how much a solenoid cost and what the purpose of it is?
Take it to a shop. Dealerships almost always charge way too much. That job shouldn't cost more than $300.what's best for taking foreign paint nicks off of a car?
Parts InformationPart OEM Part Price
Water Pump
9 - Water Pump 89017439 $231.42 Notes
Contact dealer for most current part and price information.
Labor Skill
Level Mfg.
Warranty Standard
Water Pump
Replace 3.6 hrs
Water Pump Replacement (LM4)
1992 stanza keeps blowing fuel pump fuses...??
Tools Required
J 38185 Hose Clamp Pliers
Removal Procedure
How should I drive my stick shift car downhill?
car paint vs. car varnish vs. car polish?
Drain the cooling system.
Loosen the air cleaner outlet duct clamps at the following locations:
Throttle body
Mass air flow (MAF) /Intake Air Temperature (IAT) sensor
Remove the air cleaner outlet duct bolt and duct.
Remove the accessory drive belt tensioner.
Remove the cooing fan and shroud.
how to remove scratch from truck paint?
The heater isn't working properly in my 1996 Dodge Intrepid?
Using J 38185, reposition the inlet hose clamp at the water pump.
Remove the inlet hose from the water pump.
what is the spark plug gap for a ford mondeo?
Can somebody tell me where to find the VSS wire for a 2006 F150?
Using J 38185, reposition the outlet hose clamp at the water pump.
Remove the outlet hose from the water pump.
what is that bid round thing in the middle of my engine?
92 ford areostar alternator replacement?
Remove the auxiliary heater inlet and outlet hose/pipe nut.
Using J 38185, reposition the throttle body hose clamp at the throttle body.
Remove the hose from the throttle body.
Using J 38185, reposition the auxiliary heater inlet and outlet hose/pipe clamps at the water pump.
Remove the inlet and outlet hoses/pipes from the water pump.
tighten handbrake on a renault clio p reg?
Remove the water pump bolts.
Remove the water pump and gaskets.
Discard the water pump gaskets.
Installation Procedure
Mondeo P Reg 2.0 GLX. Thud Sound when turning and then a small Gerbil sound.?
Important: All gaskets surfaces are to be free of oil or other foreign material during assembly.
Install the water pump and NEW gaskets. Notice: Refer to Fastener Notice in Service Precautions.
Install the water pump bolts.
Tighten On the initial pass, tighten the bolts to 15 Nm (11 ft. lbs.) .
On the final pass, tighten the bolts to 30 Nm (22 ft. lbs.) .
How do I replace the body panels on my car myself?
Can you help me with my 93 Tempo?
Install the auxiliary heater inlet and outlet hose/pipe nut.
Tighten the nut to 10 Nm (89 inch lbs.) .
Install the hose to the throttle body.
Using J 38185, position the throttle body hose clamp at the throttle body.
Install the inlet and outlet hoses/pipes to the water pump.
Using J 38185, position the auxiliary heater inlet and outlet hose/pipe clamps at the water pump.
Where is the heater core on a 99 lincoln town car?
My fiesta xr2i keeps cutting out in the morning ................?
Install the outlet hose to the water pump.
Using J 38185, position the outlet hose clamp at the water pump.
how to change spark plugs on a 1999 expedition?
Install the inlet hose to the water pump.
Using J 38185, position the inlet hose clamp at the water pump.
Install the cooing fan and shroud.
Install the accessory drive belt tensioner.
1995 ford tauras, the ABS light turns on and the brake seems to get hard?
1985 GMC flywheel/torque converter issues?
Install the air cleaner outlet duct and bolt.
Tighten the bolt to 10 Nm (89 inch lbs.) .
Tighten the air cleaner outlet duct clamps at the following locations:
Throttle body
MAP/IAT sensor
Tighten the clamps to 7 Nm (62 inch lbs.) .
Fill the cooling system.
My 2000 Saturn chugs when I rev it past 4000 rpm's.?
I need help with my headlights?
1990 honda accord ex wont start HELP PLEASE!?
Do you need a new exhaust system for a new muffler?
© 2007 ALLDATA LLC. All rights reserved.
Terms of Use
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.