Question:
How do I remove the catalytic converter from a '91 Ford Ranger??
Answers:
can a smell of gas inside my car have a long term effect on brain performance?
unbolt it from the manifolds and muffler and bolt a new one in. you won't find a shop to take it off for you. test pipes are illegal now. legally and best thing to do is have the bad one removed and replaced. have the vehicle checked to find out why it went bad. if the converter is not bad, don't remove it.where is the starter located on a 1995 lincoln towncar and how can i unlock it?
VERY CAREFULLY LOL OK ALL JOKES ASIDE WEAR GOGGLE PROTECT YOUR EYES FIRST IF YOU HAVE EVER REMOVED A MUFFLER YOU CAN REMOVE A CONVERTORWhat causes the top hose connected to the radiator to pop off? Just happened to me this morning.?
its kinda like amuffler, but it is required by law, if you take one off it needs to be replacedHow can I restart my car after not plugging it in?
Usually is welded to the to the muffler and screwed to the headers cut one side and unscrew the other, it better to have it removed by a professional since they have all the tools necessary to do it. Good Luck!How do I fix the temperature dial in my car?
Gas wrench formal name torch and measure thee diameter and length of th pipe go to local parts house or muffler shop will make you the test pipe clamp or braze back on the check engine light may come on if it does and bothers you put a piece of black electrical tape over it good luck hope u are not in an inspection state.What would happen if you open the radiator cap while the engine is hot?
Hacksaw?What is the best way to stop water from leaking into your car interior?
you can't take it off. have to replace it clog's up and will mess up your truck. take it to a muffer shop and let them do it.How do you get the "dusty" smell out of a car's (2002 Focus) AC?
That all depends on whether or not you're replacing it or getting rid of it .If you're replacing it you need to start at the donut seal . this is located at the end of the exhaust manifold . it will have 3 bolts and compression springs , these are available in the replacement kit . the other end of the converter splices into the center pipe , this one is generally no fun , i would recommend cutting this one .More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.