Question:
Answers:
1991 Nissan Maxima Flexplate Keeps on breaking!?
Your motor may have died. Depending on the age of the washer it might just be just as cheap to go get a new one as opposed to getting it fixed.i need help with the removal of the ball joints an wheel bearing on a peugoet 106?
check power cord & see if'n it's unplugged1988 chevy caprice with starting issues?
If it's during a delicates cyle, it may have a "soak period" that will start up again in about a minute. If it stopped working altogether, than you may have an electrical issue.Does anyone have a clue what 'chaulmoogra' oil smells like?
Wow! I had the same problem happen today! I reached in and evened out the weight of the load and it started to drain and spin. It was a small load. Dont know why it happened, but is working fine now.misfiring due to electrical system?
How often do you drive your washing machine, and how many miles do you get per gallon when you do? If you don't, why are you asking under cars and transportation?Find the mean, median, and mode of these numbers. 90,92,85,82,and 90?
But...spinning and draining are both controlled by that belt under it that has either broken and needs to be replaced or has come off and needs to be put back on. If the washer is full of water, drain it first. just lower the drain hose and the water will run out, catch it in a bucket until you have it empty enough that you can prop it up enough to see under it. See where the belt is supposed to be? If it fell off, put it back on. If it broke, take the old belt with to the store to get a new one.
do u know what the things are called that shoot the windshield wiper clearner to your winshield?
chances are the belt broke if you can still hear the motor running when u turn it on then it is the belt .lift it and see if the belt is broke then write down the serial number and take the old belt to the appliance store.if u can't hear the motor than check to make sur it is plugged in and u didn't blow a fuse.if there is power than the motor quit. call an appliance shop they usaully charge 20 bucks if u take it to them to tell you what is wrongGood Day! i have a 2000 chevy impala and the windshield wipers aren't shooting out the fluid?
sounds like the belt broke on it.get the part number from it, put in a yahoo search bar and you'll be able to find a diagram of your washer. from there, see if you think you can replace the belt on your own. If you can get a size of it, you can goto an autoparts store and get one for about $10-$15. From an appliance source, double that. rubber is rubber.
Where is fuse #31 located in a 1995 nissan altima?
Could be a belt, or if your machine doesn't have a belt it has a coupler that connects the motor and drive gears for the drum. Some are made of plastic and break when the machine gets overloaded. I replaced the coupler in my machine last year. Had to remove the entire body of the machine and pull the motor and gears apart under the drum. It was only a $10 part, but a pain to fix. You may want to call a repairman if your not mechanically inclined. You can also check http://groups.msn.com/appliantology/home... that is where I figured out how to fix my machine.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.