Question:
Answers:
does having a turbo charger increases fuel consumption?
Are you talking about actually removing the tire from rim and installing onto rim? If so just take it into a tire shop, it's cheap enough, you need the equipment otherwise you'll just damage rim and tire. If you mean taking a wheel of as a unit from car then crack the nuts loose before jacking, then jack and remove wheel. Install wheel, snug up the nuts but don't tighten yet. Lower vehicle and tighten nuts up in a cross pattern. If jacking on soft ground place a piece of board under the jack, check with manual or a mechanic to see where you should be putting the jack under the car.What kind of oil do I put for a 1990 toyota seca?
Looses the bolts a bit BEFORE you jack the car up. Otherwise, you will just spin the wheel with the tire iron when it is in the air.what is the correct name for a tcc switch and a shift solenoid for the transmission?
Take 'em to Wallmart!how can you tell a sensor is going out on a 96 ford contour?
1. Jack up the vehicle.2. Remove the tire.
3. Put a new tire on.
4. Unjack the vehicle.
5. Laugh all the way to the bank.
Oh, and loosen the nuts before you get the wheel off of the ground.
ooses the bolts a bit BEFORE you jack the car up. Otherwise, you will just spin the wheel with the tire iron when it is in the air.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.