Question:
when spraying two pack do i apply the laquer before the basecoat dries or do i let the basecoat dry before applying the laquer......
What is a timeing belt and what are the symptoms of it giving out?
not sprayed metallics before...ta
Answers:
What is the best thing to stop battery post corrosion ?
Mist on the base coat untill you are happy with the colour ,Then mix the laquer 2-1 / 10% thinner , by the time this is mixed the base will be just about ready for the laquer .It doesnt really matter as you only mist on the base anyway and is virtually dry within a few minutes , so dont go to heavy with the base, that`s when you start to get reactions as the base is taking to long to dry .
Would "assmouth p" please reply to questions it knows something about.?
Not sure about that side of it but be careful not breath any in, it's bad stuff!why my car past oil on the radiator?
let the basecoat go off for ten mins then apply lacquerWhere can I get a factory repair manual for a Chevy Cavalier?
put first coat on let dry then flat off with 1200 grade wet and dry repeat process until happy with colour then apply lacquerwhere is the dipstick to check the fluid level ot the auto transmission.?
sand it down with grade 300 sand paper and then spray with the basecoat and the lacquer just makes it nice and shiny.need any help just e mail me.
good luck
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.