Replacing timing belt on 91 RX7 a dificult job?

Question:
How hard is it to change the timing belt on a '91 RX7? Is it a job I could do on my own, or should I have a shop do it? Also, where can I get a timing belt for a 13b engine? While I'm at it, whats the best performance cam to put in?

Answers:

is the perkins 6247 engine good or bad?

From my understanding its hard to change the timing belt in anything.
Id take it to a shop.
Given the other responses I would like to add that you really need to take it to a shop if your not even aware that your car doesnt have a timing belt

My BMW locks are stuck because the battery is dead. How do I unlock my car?

I thought RX7s had rotary engines and they don't have timing belts!

On a 1993 caddy does the torque converter go out immediately or gradually?

Not a hard job at all The RX7 doesnt have a cam, or a timing belt. Rotary motor man.

What should I look for in an Air Impact Wrench and Compressor?

The RX-7 is a rotary--no timing belt or cam.

If a tie rod on your car needs to be replaced..?

13B-DEI is a rotary engine from Mazda.
Applications:
1986–1988 Mazda RX-7, 146 hp (108 kW)
1989–1991 Mazda RX-7, 160 hp (119 kW)
Since it has no valves, it does not need a timing belt or a camshaft. It has only one belt and it is a Gates 9420 V belt.

what is the difference between positrack and limited slip differentials?

i own a shop,and there is no belt on this engine at all and it sure don't have a cam either,good try though some might fall for it,,but it don't have valves ,so no cam is needed either,,lol,,good luck ,

I have a 91 Chevy suburban with a problem with the emergency brake cable, it's dangling under the truck.?

dude you don't have a timing belt

How does engine braking work and when do you need to do this?

obviously you have no idea how a rotory engine works. I suggest looking up more information on the wankel rotory engine befor buying anything for it. they dont use camshafts nor do they require a timing belt. research more.

Does anyone know how to get the smell of gasoline off your hands?

i think that its hard because my dad is a machanic and he cant do it
ps hi steve its a7x's chick how are you
More Questions & Answers ...

  • truck frames?
  • If I get new tires, do I need to get an alignment as well?
  • Dragging Brakes ***please read***?
  • haw to change shock apsorbers on 1997 mercedes benc c230?
  • Have 94 Ford F250, engine dies when I turn on headlights?
  • How does an adjustable cam work?
  • How do you change a car battery?
  • How could i take paint off rims that were painted?
  • Where is the fuel filter for a 2000 Seat IBIZA 1.4MPI located? How do I replace it for myself (without books)?
  • What can it be that is making my car use and burn gas?
  • This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.


    Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.