How do I Install new Titanium "sparks" in my 1997 Sentra by myself? I've heard it is pretty easy.

Question:
It is going to be my first time doing it.....

Answers:

Are there any mods I should make after installing a cold air intake?

Follow the spark plug wires and pull loose from the base. do not pull from the wire as you may break or damage the wire. Get a spark plug socket and wrench and remove the plug, turning counter clockwise. check the gap on the new plug, add a drop of never seize to the threads and start by hand to insure you do not cross thread or damage the threads. tighten to about 20-25 ft lbs. attach the spark plug wire and boot and proceed to the next plug.

---

More Questions & Answers ...

what causes a car battery to overcharge?

Can cars run on veggetable oil?

Why when i started my motor vehicle engine it started to jolt or shaking?

how do i clean my injectors on my 2004 grand prix myself. It will cost me $70 to have someone do it.?

Heater and brake lights?

I accidently poured windshield wiperfluid into the power steerng fluid tnk.Will this cause damage.What do I do

equipments used for cement making?

vehicle scanned on global obdii - what does code P0440 evap emmission control system malfunction exactly mean?

How many miles can you get on 5 quarts of oil last in a car?

If the head gasket on my 1998 Chevey malibu is bad, can I replace that myself?

This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.