Question:
I had the a arms checked and the wheel bearings are good and i had new struts put on resently and that didnt fix it.
Answers:
Can I replace the ignition switch and lock cylinder in a 79 bronco without the key?
check the whole system. your shocks and struts, and check the boots, some times the boot could be dry rotted and it will rub and pop. also check the cv joints. if their is a problem with your suspention than it could effect your cv joints and motor mounts.Why is car pooling called car pooling?
your struts are goingastra 1996 2.0l cdx manual central locking?
I have an 04 Envoy. Same thing. It was the front universal joint. Replaced it and noise stopped. I hope this helps youmy Nissan primera is tickin like a bugger how do i stop it?
hers how to check the ball joints: jack up the front grasp tire and try to make the tire move form top to bottom. if the tire moves when you grab it by the top and bottom and you see the ball joint slop around it needs replacing. remember there are upper and lower ball joints. i hope i explained how to check it clearly ive done it this way and it works.to check your tierod ens try to make the tire move by grsping it on the sides and move it sideways.i could show you how to do it easier than trying to explain but i hope you get the point.It either has to be a ball joint or something with your axle or shocks.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.