Changing wiper motors?

Question:
Do I have to take off my wipers in order to get my wiper motor off of a 1991 chevy s-10 pick-up , I know that 3 bolts are on the firewall but I was told a nut is on the shaft as well ?

Answers:

my temp guage passes the H sumtimes then goes back to normal then back to H?

you can just take the 3 bolt out and worm the wiper linkage out enough to undo the nut on the motor shaft, but you may bend the wiper linkage. if you take off the 2 wiper arms and the metal vent under them you can take off the nut first then remove the 3 bolts and wiper motor. before putting the wiper arms back on, run the new motor and shut off the switch so they park, then turn off the key and install the wiper arms.
More Questions & Answers ...

  • how do i hot wire my 1987 626 my key was lost?
  • whinch wont release on fourman fourwheeler?
  • I have a 1998 Honda Civic EX and it won't start!?
  • When you car needs servicing do you take it to the dealership or to an independent mechanic? Please explain.?
  • The hazard lights only work when I use the turn signal at the same time.?
  • Does anyone know how to get STP gas treatment out of cloth car seats??
  • How much it cost for two front brake pads+labor for 04 corolla ?
  • Will 10w40 oil hurt my car?
  • I have an 92 F-150 and it will not start due to the fuel pumps keep on cycling they will not shut off.....?
  • was told i need a transmission controller for 2002 neon price $565 for part, does this sound right?
  • This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.


    Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.