Question:
I've been driving fine but recently my stick shift has had a hard time going into the slot it should---kind of like when you try to shift down into first and it doesn't work without declutching.. but now it is happening with all the gears, and I have to ram it in there just to go, and I have to press the clutch down the last millimeter into the floor, and sometimes that still won't work.
Sometimes I let out the clutch really fast and let it pop back up (is that what "popping the clutch" is?) and that helps, but I was wondering if there was anything else I could do before taking it to the mechanic next week?
Answers:
your shifter linkage must be adjusted. or your clutch.
'90 Ford econoline sputters and stalls when first moving.?
Nope, It sounds like you need to have the clutch adjusted. Simple fix but can be enough to really piss you off.2001 tundra HOW MUCH should i pay.??
I had a similar problem, and it ended up being a leak of breakfluid, which was letting air in.1996 Chevy Silverado has no heat.?
I had to have the master and slave cylinders replaced costing about $500.
How much have you been charged for Roadside Assistance?
But get it looked as asap, try not to drive it till you can get it there, you might need a new clutch, and they arent cheap..
I am in a mess with my car Please Please Help??
the master cylinder of Your clutch.is bad?
is low in fliud?
is leaking?
pumping the clutch means: pushing the clutch pedal several times to built pressure of the fluid in the clutch system.
why is it so tough to find auto parts stores that carry?
must be the snyronizer.what octane gas should a 1998 chevy 1500 series truck perform best?
The transmission is gonebcz of not having oil thats y
95 Camaro possible starter problem?
call me at 1877-303-9854
we sell japanese transmission
we can help u out
i own a repair shop,and it could be a part in the transmission doing this or one of the cylinders that work the clutch going bad on it,that's usually what it is when their doing what yours is the cylinders going bad on it,,their not to bad expensive to have done,they should have done those when they did the clutch in it ,but all shops don't replace things if they don't have to,but id say that's what it is ,good luck i hope this help,s.
Whitch is the best car wax? The most long lasting?
i would say that your synchronizers are going bad in the trans but it could be you clutch and throw out bearing the only thing that you can do to self or DYI is ween you are set at a light Doe's your truck seam like it is stelle wanting to go with out you foot hard on the floor if it Doe's sound more like the clutch but sound like a trip to the shop99 Ford Contour 4 banger; it's 10 below, going to 21 below?
The obvious answer is that the clutch is dragging but it's also possible that the transmission is low in gear oil.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.