How do you push-jump start a car with a stick shift?

Question:


Answers:

Where can I get a good deal on car parts like brake lights?

you need to get the car rolling first of all either down a hill or get help from someone (do not try to push it yourself someone needs to be in the driver seat for safety) have the vehicle in neutral. with the ignition key in the on position push the clutch in and put the vehicle into either 1st or 2nd gear and let the clutch out. good luck and be safe.

The o/d light starting flashing--------97 mazda 626...plz help..have no idea what that means??

put it in first, get the car rolling with your foot down on the clutch, then raise up off the clutch and the car will start to fire up, then drop the pedal back down quick before you stall the engine.

By Putting bigger rims on ur car does it hurt ur car?

You have to get the car rolling, whether you push it yourself, use a downhill grade, or have others push it. When it's rolling at, say, at least 5 mph, but maybe a little faster, throw it into first gear and pop the clutch quick.

How much does it cost to paint a C5 corvette? How do you remove the old paint?

Get it rolling(down an incline is easiest)turn on the ignition,while putting it in 1st gear,and then "pop" the clutch! Be care-full if you haven't done this before! Don't hit anyone or anything! Good Luck!;-)=

What do you mean by c/w in case of hardwares i.e. nuts & bolts?

Usually you need more than one person. But if your on a hill your in luck. You need to put your car in gear and hold the clutch in. Thats when you need some people to push you until you pick up enough speed and you just let the clutch out.

4 the 7MGTE, Will a Metal Head Gasket and ARP head studs be able to produce at least 15 psi with out blowing.?

i always use 2nd gear and make sure car is switched on with clutch pushed in, get it rolling let clutch out car should start push clutch back in so it want stall and away you go

What are adjustable absorbers?

best thing to do is get the car facing downhll or get 2 r 3 people ta push the car on flat service! now turn ur key till all ur dash lights r on, for a gas car u must use 2nd gear for a diesel u use 3rd gear! wen ur car is rollin put de car in 2nd gear n leave out ur cluch it should start!! u can do the same in revirse,just make sure ur in the revirse gear and make sure ur ignition lights{dash} are on!!!! good luck!!!!

Okay, guys. I need everyone's opinion on the following five cars...?

put it in second gear push the clutch in and turn the ignition key on and have someone push you and when going 10 to 15 mph. let the clutch out and it should start.
More Questions & Answers ...

  • How do i hotwire my car?
  • 1986 Chevy Monte Carlo?
  • My car starts, then eventually stalls...then it won't start again 'til next day?
  • How long does it take to change the status from L1 visa to H1 visa and simultaneously apply for green card?
  • Vans radiator bubbling??
  • What should i do about my car? 1997 Jetta 2.0?
  • How to change engine oil in opel astra (2000) engine type1.4L,ecodriv?
  • 88 chevy s10 4x4 front axle wont engage?
  • Will headers help increase the sound of my exhaust?plez help?
  • Why doesn't the ac in my 1990 Acura Legend blow cold air and how do I fix the problem?
  • This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.


    Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.