Question:
I know one of the axles needs replaced but how do i know which one is bad?
Answers:
does anybody know about a good, honest repair shop in fresno? i have a damage B16 dohc vtec engine?
you can cut the wheels real deep on it,and the bad one should make a popping noise on it, you may also feel of it,and see if it has any free play in it i have found a few this way also,good luck i hope this help,s.How can I tell if the milage on my Mustang has been changed?
gently turn right then left. if the noise comes when you turn right it usually means the left side is worn. if the noise comes when you turn left it is the right side.Car problem - my accelerator sticks in cold weather.?
check the boot on the cv joints if it is torn then that is probbely the one you need to replaceThe best way would be to put it up on a lift or jack up the front end safely-then put the car in drive and have someone turn the wheel left and right and listen to where the noise comes from.
How do I start a car after a long period of inactivity?
If one is going, the other one won't be far behind.What about wrong answer getting voted best answer?
We had this repair done 2 weeks ago. If you turn a corner, and hear a pronounced clicking sound then either your CV joints/boots are bad or you need the axle replaced. This is a critical repair because if that axle goes you'll lose complete control of your steering. You'll be able to hear which side the noise is coming from and your steering wheel is probably a little loose as well.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.