Question:
Answers:
the rotors need to be turned
Best security wheel nuts on the market. A friend at work said the "McGARD ULTRA"?
Did you forget to take the packing off the pads?Checked calipers? Adjusted ? Turned?
98 Malibu fuel gauge needle stuck under empty peg? Fixable?
Its your brake light switch, some are louder than othersits the switch for your brake lights
How do I adjust the headlights on my 2003 cobra?
if it was not there before the pad replacement, is probably the pads not installed correctly. make sure the metal clips are in correctly and lube the area that the metal touches. the pads should be snug and slide on the clips. do not get grease on the pads or the rotor.i mechanic for a living,,and you may have left a clip or something off of it,,and the pads aren't riding even,,it can also be a rotor that needed to be turned down..id go back over it to see if there is anything loose on it,,better to be safe than sorry,,it may be something simple ,,but it needs to be re-checked,,good luck ,hope this help,s.
How much should I expect to pay for damaging a rear end of a 2001 Honda Odyssey?
if its there when its in park, but goes away when it's in gear, its the shift interlock switch or solenoid. it's probably a coincedence that it went bad now. no real relation to doing a brake job.How to fix a hole/crack in a carbon fiber hood?
if it only clicks once per push of the pedal then it is your shift lock release switch. it is unlocking your shifter so you can put it in drive. It has always done this and you just heard it recently. try shifting from park without your foot on the brake. doesnt move huh. turn your radio back up and have a nice dayMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.