Question:
I got a 1997 ford contour...and i was driving down the highway....blasting the heat on the medium setting....and then all of a sudden it stopped....now it only works on the high setting...doesnt turn on when its on the low/medium setting?
What is wrong with the heat in my '05 Nissan Altima?
any ideas?
One guy said it could be the resistor, any ideas on how to fix this?
Answers:
Your blower motor resistor pack has a burned out element or thermal fuse. It is located in the duct-work, usually close to the blower motor. Two screws hold it in place and there are wires connected to it... Unplug the wires, remove the resistor pack and replace.... Can be purchased from auto parts store...Good Luck...
why does my 19993 ford F-350 diesel truck die during deceleration?
I think that guy meant to say it could be a relay. A relay is like a fuse and will be in the fuse box under the hood. When they fail, it can be sporadic, unlike a fuse, which just blows and is dead.My car runs fine when the engine is cold, but as soon as it warms up, it stalls whenever i stop.?
The best way to find out is to switch it out with another (identical) relay and see if it works.
How much air pressure should be in your tires: 4 door sedan?
It's a bad resistor near the fan control. The resistor controls the speed of the fan, but is bypassed in high, so the fan works then.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.