Question:
how much oil do i need 2 put in when i do a oil change on my Honda xlr 125r x reg can any1 help me
Answers:
I want to know where to buy motor cycle boots (cruisers) in newcastle, nsw?
look in your manual, or find a manual online.on average though, it would be around 800ml to 1ltr.
dont take my word for it though...
and use good oil!
Looking for a web site for different style m50 suzuki cruisers?
When it gets to the correct level on the dipstick - add a little at time until it gets to the level - start it up and let it run for a minute then recheck levelSomething is wrong with my friends Bike?
Call your local Honda dealer and they will have the answer.My bike got a flat tire, i bought new ones how do i get bike to repair shop?
probably around 1700ml but check with your dealer first, or manual.Can a 5 year Extended Warranty on a Yamaha V-star 650 be transferred to someone else on a used bike?
Yep, Read the stick altho Hondas can be alittle tricky about threading the stick in or not to read them...If you dont have a manual just look for sites online, I'm sure there's one somewhere for your bike.Honda xr100/xl100 1981-current?
If you are not sure how much oil to put into the sump do the following:1) Make sure the bike is on level ground
2) Add 1/2 a pint of oil
3) Insert dip stick but dont screw it in
4) Repete this process till the oil level reaches the top line/mark on the dipstick
5) When you get to the line/mark you can now screw in the dip stick fully Run engine for 2 minutes or take for a short run say around 2 to 3 miles
6) Place bike back on level ground Remove the dip stick and wipe clean Wait a few minutes and then insert it back remembering not to screw it down Remove it and check the oil is still the line/mark if so screw the dip stick back in fully
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.