Question:
Answers:
Are Ducati's worth the money compared to Japanese SBs?
Use vice grips if you have access to it, if not, go to the local hardware store and get a set of easy outs, they will come in handy. drill a pilot hole in the bolt, then use the easy out.Best of Luck!
Is the 2008 KLR 650 gonna be anything better than the 2006/2007's...?
You can use an "easy out". You drill in to the head of the bolt and use the tool that loosens as you tighten. You can get them at auto parts storesHow do I hook up a multimeter to the wires to test the stator on my motorcycle?
not much else to say but use the easy out, if that doesnt work youll have to drill out the bolt and rethread the holeweld another bolt to the top of it. Then you can use a wrench to back it out. Done this on quite a bit of machinery over the years and cars
First, if accessable, use vise grips.
If not, you can try an easi-out.
Or, grind flats in the side so you can use a wrench.
Or cut a slot in the head for a screwdriver.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.