How long should i let jbweld set up?

Question:
I put jbweld on a spark plug cause the head was stripped on my bike. how long should i let it set up before i start the bike.

Answers:

Can the Yamaha Virago 535 handle prolonged 45 degree heat of the Ausie outback?

I see you did the JB thing anyway.
Did you read the directions? Says how long on the package.
Helicoil would be the cheap and easy way. The other inserts are better.
That plug has at least a 95% chance of becoming a bullet! JB is strong, but NOT pressure rated. If it is not 100% cured, it will soften and run. Seen it happen on water-cooled blocks.

How do i ride a dirtbike?

Either strip that crap off and do it right, or buy yourself an armor vest and a steel cup (and insurance).

What kind of bikes are best?

5 days.

I'm 5' 6" and weigh 163 pounds which Harley Davidson bike would suit me best for my height and weight?

doubt full that it will work for very long...should have installed a helicoil....but now that it,s done...wait 24 hour,s..before starting..be care full..have seen spark plug,s go ballistic after trying this...stay out of the line of fire!.......goo... luck!

Whats the diffirence in these 2 dirt bikes.?

24 hours will give it time to dry and have a good hold then

Whats faster, a Honda C90 or a Suzuki GSXR1000K7?

My advice is to go remove the spark plug and remove all the JB weld you can clean off. There is a product called HeliCoils. The kit gives you a cutting tool to roughly cut slightly larger threads into the head, then clear it out and clean it out. Next you thread a hard coil into the larger threads, this coil is the right size to fit in the new rough threads, and the spark plug will set on the inside and it will act like brand new threads. you can use a little Lock Tight, but be carefull with how much, Hope this helps, Good Luck

Honda GL1000 1979 ENGINE OIL?

If you chose to stay with the JB Weld, let it cure for atleast 15 hours before using with an pressure on it, so I say 24 hours to be safe.

I have managed to loose the key to my harley bike steering coloum lock any one knows if i can have one cut?

I spoke with a friend of mine who know much more than I do about motorcyles, he said that, depending on your bike make and model, if it decided to give out on an upstroke, you'll possibly end up with a hole in your tank, just be careful, Good luck.

Which is faster a yfz 450 or 700 raptor?

defo dont use jbweld .get it coiled .coiling is the safer (more expensive)more reliable way to go ...

If they maid a scooter say 1000cc would you buy it?

just dont be in the way if the jbweld decides to let go .DUCK

Is it possible to get a bike onto a swingarm stand with just one person, by yourself?

Should have used a helicoil.What are you going to do when the plug fouls out?I would clean it off before it has time to set up and start over again.

More Questions & Answers ...

World fastestmotorcycle 100 yards?

What dirt bike should i get?

Can anyone tell me if a 400cc suzuki bandit motorcycle can be lowered?

Is it a big job?

How do I put a Visor on an Arai 'condor' Helmet?