How much horse power will a jet kit give my hd sportster 1995?

Question:


Answers:

pan head bottom end(cases) shovel head top end I have seen this configuration any input as to feasability?

the jet kit by it self, very little, if any. you install a jet kit if you change the exhaust, cams, air intake etc, and you usually rejet to make the mixture right so it isnt to lean for the modifications.

Which motorbike would you choose (best according to you) in the 100cc, 125cc, and 150cc segments in India?

A jet kit is only necessary for a few reasons
1. You are going to be in a dramatically higher or lower (relative to sea level) climate. If you are travelling and passing through it will be OK.
2. You have changed the AIR CLEANER ELEMENT to a higher flow. This allows in more air, therefore the bike will be running lean (bad). Pipes make almost no difference to carb. performance and functionality.
3. Engine mods (cams, heads, larger bore, etc) again, lean is bad for an engine.

Hey Harley Riders, what kind of support vehicle do you ride with?


If it is an 883 the best bang for the buck is have your cylinders machined to 1200cc by a good machine shop, put some good Wiseco, S&S, KB, etc. pistons in it (9.5:1 compression is a good streetable number), get some Andrews N2 cams, a good set of pipes (not drags, a 2 into 1 makes the best power in the most useable place) rejet to a 180 main, ride it 1000 or so miles, and check your plugs.
white=lean, go to a 185 jet
black=rich, try a 175
caramel color is spot on... elevation makes a difference in jetting, so you may need to try a few combinations.
don't waste a lot of money on kits though, just buy the jets for a few bucks apiece.

What Are the requirements to import a motorcycle into australia?

None. It takes more than a bigger hole to give you more power. You change jets to match intakes and exhausts and other modifications. If you just put bigger jets in, all you'll do is waste gas.

Is this a good dirtbike for me??

My advise to you my cyber friend, Is check out www.sportster.org

what oil should be in a 1980 yamaha maxium 650?


you can find answers to many of your questions in both the tech & archive sections.

how much horse power will a jet kit give my hd sportster 1995?


Stage 0: Stock

kawasaki dirtbike?


HP=40 for 883, 50 for 1200 (average)

best price for harley davidson mortorcycles parts in canada?



------------------------------...

im getting a 125 dirt bike for off-roading and i was wondering...?


Stage .5 (also known as "The Harley Tax"): Stock plus:
SE Air Cleaner(1)
SE Slip-On Mufflers or equivalent(2)
Rejetting (DynoJet, Yost or just jets)(3)

Are there and good motorcycle painter in the DFW TX?


HP=50 for 883, 60 for factory 1200(4)

Scooter Problems-need help?



------------------------------...

What do you need to rebuild the top-end of a motocross bike?


Stage 1: Stage.5 plus
883/1200 Conversion for 883s(5,6,7,8)
SE Ignition Module or adjustable one(9)

I have a 82 shovelhead and would like to know good place for parts?


HP=60 for 883/1200, 65 for factory 1200

Please tell me comparative better option for 125cc bike in b/w Glamour, Honda shine,TVS GLX,discoverer?



------------------------------...

v-twin motorcycles?


Stage 1.5: Stage 1 plus
Andrews N2 cams (mild)(10)

Bajaj Bikes..?


HP=65 for 883/1200, 70 for factory 1200

How wide should a parking lane/bike lane be?



------------------------------...

i have a 1979 harley sportster and need to replace the frame?


Stage 2: Stage 1.5 plus
Andrews N4, N8, or SE bolt-in cams instead of N2(11)
SE S1 Lightning or other bolt-on +/- 10:1 heads(12)

where can i find a piston kit for a 1976 husqvarna 125cr?


HP=75

ghost rider motorcycle, does anyone know who built this wicked bike?


Options: 2 into 1 header system, add +/- 7 hp(13)
SE carb (or equivalent), add +/- 3 hp(14)
XR750 (or other) valve springs, no gain(15)

I just bougt a used 2006 Harley Softail Deluxe and a fob is attached but does not work. I press the fob and?



------------------------------...

Can you install fender eliminator kits and flush mount turn signals yourself?


Stage 2.5: Stage 2 plus
Professionally ported 10:1 or higher heads
Matching (to head) domed pistons(16)
XR750 valve springs or SE cam kit(15,17)
2 into 1 header system(13)
SE,S&S Super E, or Mikuni HSR42 carb(14)

What is this cc they are referring in a motorcycle?


HP=90+

Invoice price on 2007 bmw k1200gt motorcycle?


Options: big valves (big twin size), add +/- 5 hp(18)

will the gas tank off an early 90's Harley FXRS fit my 1975 Superglide?



------------------------------...

sports bikes in india and their prices?


Stage 3: Stage 2.5 plus: (or:)
Big-bore cylinders and pistons and/or
Stroker kit and/or
Nitrous injection and/or
Supercharging

what is the best polish for Chrome exhaust on my bike...also can i use ammonina free winshield fluid?


HP=?

What is the price of the bike, Thunderbird by Royal Enfield in India?


Options: many
More Questions & Answers ...

  • What is the latest Carl Fogerty DVD?
  • Motorcycle Maniacs?
  • What is the best harley davidsion motorcycle for a first time rider?
  • i asked why golfers dont wear helmets the replys were they were too good and feel they need?
  • Why aren't all the wheels on a horse drawn buggy small & level?
  • I have a 1980 Honda Silverwing motorcycle?
  • Do you need a "motorcycle endorsement" for motorbike in California?
  • I have a HD 883. I know this is a small Harley.will I be OK mechanically to travel and tour, can it handle it?
  • Windshield for Buell M2?
  • i want to get a bike.. but have no clue where to start..?
  • This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.


    Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.