Question:
Tried to bleed the rear brake system on italjet dragster but it will not build pressure.Ive tried by pumping handle,realeasing nipple etc.Tried bleeding through a syringe etc but not even a tiny bit of pressure builds..how can I trace where the fault is.?
Answers:
Importing a CBR 600 rr 2004 to India.Need to know a couple of things.PLEASE HELP.?
I would suggest replacing all the copper washers and banjo bolts if you havent already. when i put braided hoses on my bike i used an Easy bleed one man bleeding system. It worked like a charmWhich motor scooter/'mini' electric bike or go-kart should I get?
Could be a bad seal in the master cylinder, is the master pushing fluid through the lines.Try cracking the line off the master, might be airlocked right at the cylinder.
What would you pay for a 79' Honda CT70?
ISnt there a gasket where you put the brake fluid in? Maybe if that gasket was faulty it would not build pressure.looking for wiring skematic for my dads 1976 hodamatic?
No one here can tell you exactly what's wrong with your brakes without seeing them first hand!whats wrong with a dirt bike that starts up but you have to keep giving it gas to keep it started?
Try a mechanic!
What is the reserve capacity of Bajaj Pulsor 150 DTSi?
Sounds like the master cylinder or no fluid.Stupid question but, I take it you are closing the nipple before you relaease the pedal? Otherwise it will just drag air back in and you will achieve nothing.
yz 250 blowing fuel out the air filter side of carb?
open the bleed screw and flush it out with compressed air. then follow the basic bleeding guides.Where in Bombay do I get spare parts for my Yamaha RXG?pls let me know as soon as possible?
Take the lines off the master cylinder and plug the holes. Then see if you get back pressure. If you keep pumping when you're trying to bleed, and no fluid is coming out anywhere and the level isn't going down, it has to be the master cylinder.Where can I find matching paint for a 2006 Honda 919 (CB900F) bike?
Brakes are sometimes better bled in reverse. If you are adding fluid to the master cylinder and pumping it through with the handle or pedal, try doing it in reverse.who invented the 1st gas powered motorcycle, and in what year?
Fill your clean oil can with brake fluid and put some plastic hose on it that will fit snug over the bleed nipple. Open the bleed nipple and pump fresh fluid from the bottom up with the oil can. Slow easy strokes, if you aerate the fluid it will form bubbles again in the lines. Capture the excess at the master cylinder but don't re-use it until you have left it overnight for the bubbles to dissipate.
gordon offers good advice........................
Is there any race track for motorcycle around Houston, TX. ?
have u got any pads in the bike mite sound silly but have a lookMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.