Question:
After i reinstalled a exhaust(it was clogged and i cleaned it out),
I started it up but the RPM drops little lower then normal idle(for my bike it was about 1500), and dies.
I looked up the book and adjusted the idle screw....but for some reason, i kinda played with the "right hand carburetor pilot screw(idle mixture screw)".but not left
I just looked at the picture and didn't realize what i was doing...
However... I ONLY touched righthand idle mixture screw little and idle screw. On the way, the bike would not go up more then 6000 at FULL trottle....it used to be really sensitive...
and while i was in parking alot...it stoped... It starts only when i put it on choke and I HAVE TO pull a trottle a little...while kicking.
After it starts, i pull a full trottle, it works like before..all sensitive and going up RPM and everything, but after i put it on gear and drive, RPM just don't go up and if i stop, it DIES again even i pull the full trottle, RPM just DROPS
Are there and good motorcycle painter in the DFW TX?
Help me please
Answers:
Where can you get spare parts for a chituma moped? It's chinese.?
Your carbs are out of whack. It's time for some pro help.Taking it to a mechanic is not a bad thing. Lots of times you can talk to the guy while he's working, and watch if you stay out of the way. Great way to learn stuff. Don't go to a dealer, they won't want to work on it because of how old it is. Find a smaller shop.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.