Question:
I saw this done on a video where the guy only used the clutch to downshift. What's up with that??
Answers:
How to import used motorcycle in India?
Yes.Can anyone tell me if a 400cc suzuki bandit motorcycle can be lowered?
You can do it on any bike.
How many kilometres would 3 litres of petrol in a dirt bike get you?
Once you have done it a few times, it can become almost second nature. You will never stop using the clutch, as it has other applications, such as slow speed turns, or use in heavy traffic, but you can actually get down to using it mainly when stopping or starting.
Good deal? 2000 Yamaha YZF R6, 18,500 miles for $6.000.00?
If you are an experienced rider, and you are familiar with your machine, then you already know the revs by their sound when you change gears.
Does anybody know the total length of a 2006 honda shadow vt 750dc?
For up-shifting, you merely back off a tiny bit on the throttle and shift. This takes the pressure off the gears for the moment, which permits an easy disengagement, and allows the engine speed to reduce a bit, and adjust to the higher gear ratio.
Is there no locking ignition for a 03 Harley Road King. There seems to be only a locking steering.?
For down-shifting, you need to do the same momentary release of throttle, to release gear pressures, but as you move the shift lever you roll on the throttle again, as you need a higher rev count for the lower gear.
Can you finance a already financed motorcycle?
Your ear and brain are actually better practiced at this than you may think, as you have been doing it for some time, but never realized it.
Your gears are synchronized, and thay are cut to allow for some variation in the engine/gear speeds, even when using the clutch.
With practice, you become more aware of your machine, and you may even find your shifts have become smoother than before.
How much should I expect to pay for a set of stock forks on a KTM 50 LC sr adv.?
You can, but it wears the transmission more and you need to "blip" or roll the throttle closed when you do. It's generally not a good practice.When you buy a motorcycle what % is tax in the state of ohio?
It's a common practice among many.but it has to be done at the proper RPM's.It can actaully be smoother than using the clutch and you have less chance of hitting a false neutral. Still, it does slightly increase wear on the selector drum and gear dogs and is it really that important to shave 0.2s off your gear changes when riding to the shops!
Get me the details of new pulsar led 150 cc?
It is possible to shift any manual transmission vehicle without using the clutch if you get the RPMs matched JUST right. If you don't do it at the right time though, you can cause real damage to the gears. The mechanics of a motorcycle clutch and transmission make it easier to perform clutch-free shifting but the dangers of really messing up your bike are very real.Who built the hell cycle for the movie ghost rider?
You can get away with up-shifting a motorcycle without the clutch because there is less load on the shafts then when downshifting.Where can i get a crate to ship a scooter across the country?
This is a common practice in motocross where you can save a little time and arm strength not using the clutch when up-shifting.
How to hold brushes in reassembling dc electric motor?
Drag bikes used a setup where you push a button to activate an air shifter that slammed it into the next gear while momentarily interrupting the ignition. That unloaded the tranny even though you still had the throttle pegged.
Questions about my 2006 raptor?
The key is to unload the shafts by backing off the throttle momentarily. You are exchanging a little extra speed for a little extra wear. Be careful about losing control of the rear wheel.
How do modifiy a air intake on a scooter,?
I have ridden my bike home with a broken clutch cable, so you can shift up or down without it but it isn't such a good idea.
More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.