Question:
i can start to feel the power lose now so that means i neeed them checked, is it a lot of money for new valves??
Answers:
It's usually done as part of a normal Tune-Up.
Were is the registration form for the occ chopper giveaway-not the raffle?
Bike's valve last a pretty long time in most cases.
But that depends on many,many different factors.
How can i make my yamaha yz 80 bigger like suspension wise but still keep its power?
How Often the valves need adjustment depends on the exact engine,each engine has it's own maintenance schedule.
I'm looking to purchase a sportbike, could someone provide me any suggestions and why? thanks?
You Might just need a Tune Up which includes Valve Adjustment.
Thats not very expensive.
trouble shoot or mechanical report on 1984 honda golhwing 1200?
If the valves Do NOT get adjusted according to the Maintenance Schedule,,,
THEN,,, The Valves CAN become damaged and require an actual REPAIR to fix them,,instead of just adjustment.
In Virginia, is a150cc dirt bike street legal?
That gets VERY expensive.
Idle mixture screw and RPM....?
My suggestion is to take it to a Shop and let them check it out to see what it needs.
It's a Good sign that it's still running,,
But a Bad sign it's Losing Power.
how do i wire a honda 350 dirt bike up?
If You are lucky ,,it only needs an adjustment...which will help keep it from causing actual damage.
R1 hard luggage- does it exist eg to take one or two lids?
If you Dont get it fixed,,,,it WILL get worse,
And probably cause some more expensive & serious damage.
Good Luck
which one is good performance pulsar 150 or cbz xtreme ?
*** Don't make the mistake of being afraid of the Possible Expense,,,,,then not take it to shop,and just keep riding it!!
Do you have to have a liecence to drive a 49cc gas scooter in Tennesse?
Most shops charge very Little to check it out and tell you exactly what your bike needs.
Maybe someting very simple??
can someone tell me where to find dirt bike body kit in india?
But at least you will KNOW if it's OK to ride,and how much to fix,,,and all that.
years ago i sold my bike for drugs, now that i'm drug free, how do i inter to win this chopper??
Otherwise,,,riding it without Knowing the exact problem can turn a Simple,Cheap problem into a Disaster
ihave a zx 14 ninja if i go down 1 tooth in front sprocket and Go UP one in back?
The Sooner you Fix it,,the Better for the bike,,,
and Usually the cheaper
how can i put a newer liquid cooled 250 motor on my 1974 dt 250?
for complete job your probably looking around 500 to 1000 bucks depending on the bike engine configuration...overhead cams, 4 valves per piston? , etc etc.What is the difference between a fender elimination kit and a undertail or hugger?
Take bike to your local reputable dealer, and get tappets adjusted ,and a compression check done ,this will tell you if you are in for a major job or notMore Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.