Question:
Answers:
To own a sportbike like hayabusa.?
you can put them on practically any bike. dirt bike bar clamps are usually bolted onto the top triple clamp. so if your top triple is just a solid chunk of aluminum then you just need to pull it off and drill some holes for some new bar clamps.Where can i get a blueprint for a motorcycle like a ninja?
however some triple clamps are cast and have a hollow structure on the bottom which may interfere with that. you may need to get clamps with considerable rise to clear the fork tubes which usually stick up a lot higher on a sport bike (to serve as a place for clip ons)
What is a good product to revive my helmet hair?
also you have to deal with cable/wire lengths being long enough to reach higher bars.
Motorcycle mechanics institute? anyone gone if so your opinion is wanted!?
if you referring to a street bike that already has bar clamps on top of the triple then you are somewhat limited to what will fit in those clamps. small tube bars with cross bars usually fit, oversized bars will need new clamps or risers that convert from small clamp size to an oversized clamp size.
Abs light on scooter only goes out when moving or spinning wheel?
i dont think so, i know on my sport bike the right and left are bolted in seperate and are angled totally different then a dirtbikeSure, as long as they are the same diameter as what came off the street bike. You will also have to take into consideration the length of the various cables and wires if the handle bars you are going to install are alot higher or wider.
EDIT: As the first poster said, your street bike must have a similar type handle bar mounting system. You wouldn't be able to change the bars if your street bike has clip-on style bars, well, you still could but not without changing alot of other stuff.
It depends on what streetbike you are talking about. You would have to have regular handlebar clamps on your triple fork to hold the handlebars.
The best way to do a wheelie on a 2004 gsxr 600?
geo46er gave gave the correct answer.Yes. Why not? You could change the whole triple tree and fork tubes while you're at it. How far do you want to go? You could cut the frame, rake it out, and make it into a chopper. That's what I would do.
I want a motocross bike to ride on streets. Is that legal nd possible?!?!?
Yes.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.