Question:
I like a clean look and although I like my new motorcycle, I don't like the factory decals.
Answers:
How much can i sell my yamaha 80 dirtbike for?
There is a product called "sticker shock" It is an aerosol spray that dissolves the sticky glue or whatever is on the back of stickers and decals. It doesn't hurt your paint and you can get it at just about any auto parts store.On a Honda CX500, what is the electrical part located directly to the right of the battery?
If they are decals on top of the paint/clear coat, then heat them with a blow dryer or heat gun and peel them off. Some people use dental floss and slowly remove the decal while heating. Any residue remaining can be removed with Goo Gone or Goof Off. Then apply a polish to the area and wax.I'm looking for a sport bike(motorcycle) group that likes to ride, in southern Ca.?
If the decals are under the clear coat then you're screwed. You'll have to sand it down, remove the decal and repaint.
Which motorcycle cruiser is the better value?
Goo Gone, we used this stuff at a place i used to work.Where can I get an auto (motorcycle) loan on Presidents Day?
You could have trouble if the clear coat was applied over the decals ,( rarely the case ). Normally Zippo lighter fluid works great and will not harm the paint. Just apply liberally , let it set just a few seconds ( don't let it dry or it don't work ) , the adhesive breaks down and you can peel the decal . A little more fluid and any residue left will wipe right off .How do i change the spark plugs on a 2006 cbr 1000?
Make sure you get the correct answer to your question here.There are stickers. And there are decals. Stickers are usually easily removable with over-the counter adhesive dissolvers.
Decals on plastic cowlings and fairings can be removed with a heat gun.
Decals on fuel tanks (such as stripes, designs and flames) have a clear coat painted over them.
Ride your bike to any auto body repair shop and ask. They won't charge you for one question.
Most common pipes for a Road star?
Heat and WD 40. Works very good and no scrachesTyre Pressures for MZ Skorpion?
I've seen several people make references to a "heat gun", whatever you do, Do not use a "Heat Gun" unless you want to repaint your bike. Use a hair dryer on the highest setting.Most heat guns will have temp ranges from 180-500° F! If you make a mistake it will blister your paint. Hair dryers will take a little longer but less chance of screwing up your paint.
Will an automobile headlight work on a motorcycle?
Leave it in the sun, and some good old elbow grease does the trick.Can I use e85 in my 4wheelers?
you schould use a razor blade or box cutter. Carefully place the blade under the corner of the decal and pull up lightly untill you can get a firm grip on it. Afterwards just pull it off.More Questions & Answers ...
This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.
Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.