How are cross-over bends of rails made?

Question:


Answers:

Can I buy Indian railway tickets on the net?

I'm not sure of the question, since some terms have been interchanged.

Looking for the book "Union Pacific Steam, Northwestern District"?


A cross-over is a track connection between two adjacent tracks, incorporating a switch on one rail and a switch on the opposite rail.

any train from mumbai to secunderabad?


Your choice of the word "bending" is interesting, since a slang term for operating a switch is called "bending the rail". The way a switch operates, there is a movable portion called the "switch points". There is a mechanical connection between the "switch stand", the device that operates the points, and the points themselves, which are tied together by a steel rod. Switches usually have only 2 positions, "normal" and "reverse".

Is The Silverlink North London Line the Worst Line in London?


Starting in the normal position, the points, which taper as they near the tip, would be in a configuration where one side makes contact with the rail, creating a gap on the opposite side for the "flange way." The flanges are raised portions of the inside of the wheels which extend below the height of the rail to guide the equipment.

a question about a mono rail?


When reversing the switch, the switch stand is operated moving the points to the opposite side, where the point now makes contact where there was a gap, while a gap is now created on the other side.

How do uk train companies get their money when several operator's run the same routes?


Further down the switch will be found the "frog". This is a heavy component with "grooves" molded into it to allow the flanges to cross over the rail when moving from one track to the other. As insurance against a flange going the wrong way over the frog, there is a short piece of rail on the inside of the "stock rail" (just another name for the outside rails of the switch) that doesn't appear to be connected to anything. It is there to keep the flanges from "picking the point" of the frog, creating a derailment.

Arrival time of Shan E Punjab at Huzzrat Nizzamuddin Railway Station?


There are moveable point frogs, however, and should not be confused with the switch points.

what is the name of the luxury train that runs into capetowm ?


The switch stands themselves come in a variety as well. There is the familiar "high stand", "ground throw", "variable", "submarine", "pneumatic", "spring", "controlled" and "dual control". But these are another question.

Does anyone know anything about the Trinity Railway Express in Fort Worth, TX?

Are you referring to switches? In that case a "frog" provides the actual cross over. The moving parts are simply strips of rail - despite being steel its quite flexible. Hence the term "bending the iron" for throwing a switch.
More Questions & Answers ...

  • trains in jan 2007 from kovvur to warangal?
  • What was name of Rail Road Buider?
  • how far is newham hospital from plaistow station?
  • What is the reason for some cities to abandon some of their subway tunnels?
  • salaries of metro-north employees?
  • I want to book train tickets from Hyderabad to Kolhapur.help?
  • When will mag-lev trains be available to travel on?
  • IS THERE ANY RULE THAT WE SHOULD NOT CARRY A LAPTOP IN indian TRAINs?
  • want to know about the position of the ticket for train no 2934 pnr no.425-1846420?
  • How fast do the London Tube Trains travel??
  • This article contents is post by this website user, CarQnA.com doesn't promise its accuracy.


    Copyright 2006-2008-2007 CarQnA.com. All Rights Reserved.